Removing the Film Holder and Document Mat
1. Open the scanner lid and slide out the document mat. Set the mat aside so
you can reinstall it for scanning reflective documents later.
Note:
You can't scan film or slides unless you remove the white document mat from the
scanner lid.
2. Remove the film holder from its storage place. (Remember to replace the film
holder when you're done using it.)
3. Continue with one of these sections:
"Loading 35 mm Film Strips in the Film Holder" on page 74 (for film)
"Placing 35 mm Slides on the Film Holder" on page 75 (for slides)
Scanning 35 mm Slides and Film
73