Epson Stylus Photo RX600 User Manual page 123

3. Connect a USB cable from your drive to the
of the Stylus Photo RX600.
4. Press the
Memory Card
5. Press the d button to choose
6. Press .
OK
7. When you see the "Beginning Backup" message, press
backup procedure. You may have to follow additional instructions on the
RX600 screen. All the photos on your card are copied to your Zip disk or
CD-R/RW. Depending on how many photos there are, this may take several
minutes.
Note:
When backing up photos to a CD-R/RW the Stylus Photo RX600 creates a folder for
each backup session. You can store multiple backup sessions on a CD-R/RW.
Caution:
Once the backup starts, do not disconnect the cable or interrupt the process, or
you may lose data. If you need to stop the backup, press the y Stop button.
EXT/IF USB
port
button.
Backup
USB port on the front
EXT. I/F
.
OK
Saving Photos to a CD or Zip Disk
again to start the
123