Preparing Your Computer To Remove A Memory Card - Epson Stylus Photo RX600 User Manual

You can go back and change settings at any time by opening PhotoStarter. Open
the
EPSON PhotoStarter 3
PhotoStarter 3
Preparing Your Computer to Remove a Memory
Card
Once you're finished copying photos from your memory card, follow the steps
below to prepare your computer before removing it. Be sure to remove any cards
before unplugging the USB cable from your printer.
Caution:
Do not eject a card while the memory card light is flashing, or without performing the
steps described below, or you may lose data on the card. Be sure all cards have been
removed before unplugging the USB cable.
1. On a Macintosh, drag the memory card icon from your desktop to the trash.
If you're using Windows XP or 2000, click the
Hardware
Mass Storage Device
.
Device
Note:
In Windows 98 or Me, you don't need to do anything on your computer before
removing a card.
2. Remove the card by pulling it straight out of the slot.
118
Printing and Scanning Without a Computer
folder, then double-click
. Open the Tools menu and choose
icon on the taskbar. In Windows XP, click
. In Windows 2000, click
EPSON
Change Settings
Unplug or Eject
Safely Remove USB
Stop USB Mass Storage
.