Table of Contents
Advertisement
2.3 Motherboard Installation
All motherboards have standard mounting holes to fit different types of chassis. Make sure
that the locations of all the mounting holes for both the motherboard and the chassis match.
Although a chassis may have both plastic and metal mounting fasteners, metal ones are highly
recommended because they ground the motherboard to the chassis. Make sure that the metal
standoffs click in or are screwed in tightly.
Tools Needed
Phillips
Screwdriver
(1)
Location of Mounting Holes
Note 1: To avoid damaging the motherboard and its components, do not use a
force greater than 8 lbf-in on each mounting screw during motherboard installation.
Note 2: Some components are very close to the mounting holes. Take precautionary
measures to avoid damaging these components when installing the motherboard to
the chassis.
Phillips Screws
(7)
JUIDB1
VGA
MH1
LAN1
LAN2
BMC
JPFR2
BT1
MH4
M.2 NVME
JBT1
M.2-P
CMOS CLEAR
PCH
C741
MAC CODE
MH15
SAN MAC
MH6
BIOS LICENSE
CPU
MH9
MH10
FAN3
FAN6
FAN5
FAN4
31
Standoffs (7)
Only if Needed
COM1
MH2
USB3/4
(3.2 Gen 1)
IPMI_LAN
USB0/1
JNCSI1
JTPM
X550
MH17
USB2
JRK1
JVRM1
JPI2C
MH8
FAN2
FAN1
MH7
Chapter 2: Installation
Advertisement
Table of Contents
