Supermicro X13SEW-TF User Manual page 118

Super X13SEW-TF/-F User's Manual
Password
Use this feature to set the SATA user password which allows you to configure the SMCI
Security Erase settings by using the SATA user password.
Lockdown Mode (Available when the DCMS key is activated)
Select Enabled to support Lockdown Mode that will prevent existing data or keys stored in the
system from being altered or changed in an effort to preserve system integrity and security.
The options are Disabled and Enabled.
Secure Boot
Note: For detailed instructions on how to configure Security Boot settings, refer to the
Security Boot Configuration User's Guide posted on the web page under the link:
www.supermicro.com/support/manuals/.
This section displays the contents of the following secure boot features:
•
System Mode
•
Secure Boot
Secure Boot
Select Enabled to configure Secure Boot settings. The options are Disabled and Enabled.
Secure Boot Mode
Use this feature to select the desired secure boot mode for the system. The options are
Standard and Custom.
CSM Support
If this feature is set to Enabled, legacy devices will be supported by the system. The options
are Disabled and Enabled.
Enter Audit Mode (Available when "Secure Boot Mode" is set to

Custom)
Select Ok to enter the Audit Mode workflow. It will result in erasing of Platform Key (PK)
variables and reset system to the Setup/Audit Mode.
Enter Deployed Mode / Exit Deployed Mode (Available when
"Secure Boot Mode" is set to Custom)
Select Ok to reset system to the User Mode or to the Deployed Mode.
118
http://