Supermicro X13SEW-TF User Manual page 103

Chapter 4: UEFI BIOS
Consistent Device Name Support
Use this feature to enable or disable ACPI_DSM device name support for onboard devices
and slots. The options are Disabled and Enabled.
Onboard Video Option ROM
Select EFI to allow you to boot the computer using the Extensible Firmware Interface (EFI)
device installed on the onboard video port. The options are Disabled, EFI, and Legacy.
M.2-H OPROM
Select EFI to allow you to boot the computer using the EFI device installed on the PCIe slot
specified. The options are Disabled, Legacy, and EFI.
Onboard LAN1 Option ROM
Use this option to select the type of device installed in LAN Port1 used for system boot.
The options are Disabled, Legacy, and EFI. Note that options displayed are based on LAN
OPROM ROM.
Onboard NVME0 Option ROM / Onboard NVME1 Option ROM / Onboard NVME2
Option ROM / Onboard NVME3 Option ROM / Onboard NVME4 Option ROM /
Onboard NVME5 Option ROM / Onboard NVME6 Option ROM / Onboard NVME7
Option ROM / Onboard NVME8 Option ROM / Onboard NVME9 Option ROM
Use this feature to select which firmware function to be loaded for the NVMe device in this
slot. The options are Disabled, Legacy, and EFI.
HTTP Boot Configuration

HTTP Boot Policy
Use this feature to set the HTTP boot policy. The options are Apply to all LANs, Apply to
each LAN, and Boot Priority #1 instantly.
HTTPS Boot Checks Hostname
Use this feature to select whether HTTPS Boot checks the hostname of TLS certificates
matches the hostname provided by the remote server. The options are Enabled and Disabled
(WARNING: Security Risk!!).
Priority of HTTP Boot:
Instance of Priority 1:
This feature sets the rank target port. The default value is 1.
Select IPv4 or IPv6
This feature specifies which connection the target LAN port should boot from. The options
are IPv4 and IPv6.
103