Supermicro X13SEW-TF User Manual page 42

Super X13SEW-TF/-F User's Manual
Power Fail
The Power Fail LED connection is located at pins 5 and 6. Refer to the table below for pin
definitions.
NIC1/NIC2 (LAN1/LAN2)
The NIC (Network Interface Controller) LED connection for LAN port 1 is located on pins 11
and 12 of JF1, and LAN port 2 is on pins 9 and 10. Attach the NIC LED cables here to display
network activity. Refer to the table below for pin definitions.
Power Button
PWR
Reset Button
Reset
3.3V
UID LED
3.3V Stby
3.3V Stby
3.3V Stby
3.3V Stby
X
NMI
Power Fail LED
Pin Definitions (JF1)
Pin# Definition
5 3.3V
6 Power Fail LED
LAN1/LAN2 LED
Pin Definitions (JF1)
Pin# Definition
9 NIC 2 Activity LED
11 NIC 1 Activity LED
1 2
Ground
Ground
1
Power Fail LED
3.3V
NIC2 Activity LED
NIC1 Activity LED
HDD LED
PWR LED
X
Ground
19 20
42
1. Power Fail LED
2. NIC1 LED
3. NIC2 LED
3
2