Supermicro X13SEW-TF User Manual page 85

Chapter 4: UEFI BIOS
PCH Root Port 0 / PCH Root Port 1 / PCH Root Port 2 / PCH Root Port 3 /
PCH Root Port 4 / PCH Root Port 6 / PCH Root Port 10 / PCH Root Port 11
Hot Plug Capable
Select Enable to enable Hot Plug support for the root ports specified. This feature
allows you to change the devices on those root ports without shutting down the
system. The options are Disable and Enable.
VMD Config for IOU 0
Enable/Disable VMD
Select Enable to enable Intel Volume Management Device (VMD) technology support
for the root port specified. The options are Disable and Enable.
NVME8 VMD / NVME9 VMD (Available when the device is detected by the
system and "Enable/Disable VMD" above is set to Enable)
Select Enable to enable Intel VMD technology support for the root port specified.
The options are Disable and Enable.
Hot Plug Capable
Select Enable to enable Hot Plug support for the root ports specified. This feature
allows you to change the devices on those root ports without shutting down the
system. The options are Disable and Enable.
VMD Config for IOU 1 / VMD Config for IOU 2
Enable/Disable VMD
Select Enable to enable Intel Volume Management Device (VMD) technology support
for the root port specified. The options are Disable and Enable.
Hot Plug Capable
Select Enable to enable Hot Plug support for the root ports specified. This feature
allows you to change the devices on those root ports without shutting down the
system. The options are Disable and Enable.
VMD Config for IOU 3
Enable/Disable VMD
Use this feature to enable or disable the volume management device for this stack.
The options are Disable and Enable.
85