Supermicro X13SEW-TF User Manual page 72

Super X13SEW-TF/-F User's Manual
Advanced Power Management Configuration
Power Technology
Select Energy Efficient to support power-saving mode. Select Custom to customize system
power settings. Select Disabled to disable power-saving settings. The options are Disable,
Energy Efficient, and Custom.
Power Performance Tuning
Select BIOS to allow the system BIOS to configure the Power-Performance Tuning Bias
setting. The options are OS Controls EPB and BIOS Controls EPB.
ENERGY_PERF_BIAS CFG Mode (ENERGY PERFORMANCE BIAS
CONFIGURATION Mode) (Available when "Power Performance Tuning" is set to
BIOS Controls EPB)
Use this feature to configure the proper operation setting for your machine by achieving
the desired system performance level and energy saving (efficiency) level at the same
time. Select Maximum Performance to maximize system performance to its highest
potential; however, this may consume maximal amount of power as energy is needed to
fuel processor operation. Select Performance to enhance system performance; however,
this may consume more power as energy is needed to fuel the processors for operation.
The options are Extreme Performance, Maximum Performance, Performance, Balanced
Performance, Balanced Power, and Power.
CPU P State Control
This feature allows you to configure the following CPU power settings:
AVX P1 (Available when "SpeedStep (P-States)" is set to Enable)
Use this feature to set the appropriate TDP level for the system. The Intel Advanced
Vector Extensions (Intel AVX) P1 feature allows you to specify the base P1 ratio for
Streaming SIMD Extensions (SSE) and AVX workloads and to pre-grant a license level.
The options are Normal, Level 1, and Level 2.
SpeedStep (P-States)
Enhanced Intel SpeedStep Technology (EIST) allows the system to automatically adjust
processor voltage and core frequency in an effort to reduce power consumption and heat
dissipation. Refer to Intel's website for detailed information. The options are Disable and
Enable.
72