Table of Contents
Advertisement
16. [Click] the Save Button to save all changes made to the Quality of Service
profiles.
17. Close the "Quality of Service" window by [clicking] the Close Button.
The "RADIUS Manager (RADIUS.LST)" window should now be
displayed.
4.
Configuring the Accounts Option
1. If the RADIUS Manager Window is not already displayed on the screen
[click] the RADIUS Manager Button on the Task Bar.
2. [Click] the Accounts Button on the RADIUS Manager Toolbar. The
"Remote Accounts" window should appear.
Steps 3) to 54) below add a User Account for the remote LAN at Watford.
Steps 54) to 92) add a User Account for the roving PC user.
3. [Click] the ADD Button to add a new Account profile to the list, or select
an existing Account and [click] the EDIT Button to edit the configuration
of the Account Name selected.
4. To allocate a new Account Name enter a meaningful name in the "Name:"
box. In this instance enter the Name WATFORD_CLAM.
The NAS unit "Name" entered here must correspond exactly with the
associated remote Router's Name [as configured in the Router's System
Parameters Form (obtained by typing CO SY<CR> on the command line).
5. Select the "Inactivity" Box. Enter a value of 1200 (seconds). This sets
the session inactivity timeout to 20 mins.
Once there is no activity on the line to the remote User for the period specified
in the Inactivity timeout the RADIUS Server removes all routing and path
information from the NAS Router. If the remote User dials in again after the
T
UTORIAL
3-15
Advertisement
Table of Contents
