Table of Contents
Advertisement
T
UTORIAL
18. Close the "Multi-link Nautica Path" window by [clicking] the OK Button.
The "Account Information" window should now be displayed.
19. [Click] the down-arrow on the right hand side of the IP Networking Box.
The options revealed are Enabled and Disabled. Select "Enabled".
20. [Click] the Edit Button to the right of the IP Networking Box. This will
reveal "IPPath" window.
21. Select a value for RIP Operation on this Account User's Path by [clicking]
the appropriate circle. In this instance select "Disable". We will use static
IP routes on this Path.
22. Select a value for the RIP Type to be used on this Account User's Path by
[clicking] the appropriate circle. In this instance select "RIP1Compatible
Please note that a RIP Type has to be selected even if the RIP Operation
parameter is set to Disable.
23. To add a Static IP Route which is associated with the Account Users Path
[click] the Add Button to the right of the IP Static Routes Table. This will
reveal the "Remote IP Subnet" window. [Click] the IP Static Routes Add
Button.
3-18
Advertisement
Table of Contents
