Table of Contents
Advertisement
T
UTORIAL
74. Leave the Static IP Route table Blank.
No Static Routes are as the roving PC User is part of the main HQ IP
Network.
75. To add an IP Filter which is associated with the roving PC Account Users
Path [click] the Add Button to the right of the IP Filters Box. This will
reveal the "IP Address Filter" window. [Click] the IP Filters Add Button.
76. To enter an IP Address Filter firstly [double click] the IP Address1/Mask
Box and enter the required IP address of one of filter pair then [double
click] the IP Address2/Mask Box and enter the required IP address of the
other IP address of the filter pair. In this instance enter
255.255.255.254/32 for IP Address1/Mask and 10.0.0.2/32 for IP
Address2/Mask.
Note in the above example we are allowing any user which has been assigned
an IP Address by the NAS Router (done by using the value 255.255.255.254)
to only access the UNIX Host at address 10.0.0.2.
77. [Click] the OK Button to submit the IP Filter pair. The "IPPath" window
should now be displayed.
The "IPPath" window should now be exactly the same as that shown below.
3-30
Advertisement
Table of Contents
