Outgoing Nat Connections; Figure 17-1. Nautica Wizard Window - Bay Networks Nautica 200 Reference Manual

Nautica Configuration Wizard Reference Guide

Outgoing NAT Connections

Figure 17-1.
17-2
Your Nautica router can act as a NAT gateway. Users on the
outside of the router see one IP address that the gateway can then
translate to specific addresses on the 'private' side of the router
(the local LAN).
Generally you only need to create incoming NAT entries, and this
can be done automatically on an individual path.
To create a NAT outgoing path:
1. In the Nautica Wizard window, select the router that is to
be the NAT gateway:
Nautica Wizard Window
2. Click on Advanced > Paths >Configuration.
3. The Paths table appears (Figure 17-2):
118814-D Rev. 00