5-19.
Memory Module (260pin SO-DIMM)
Preparation
1.
Remove the top panel assembly. (Refer to
2.
Remove the iAP-005 board assembly. (Refer to
3.
Remove the iAP-005 CPU board. (Refer to
Procedure
1.
Open the levers of the memory socket in the direction of the arrow (1).
2.
Remove the memory module in the direction of the arrow (2).
(1)
iAP-005 CPU board
Note
When installing the memory modules, insert them securely into the memory socket.
3.
Remove another memory module in the same way as in steps 1, 2.
4.
Install the removed parts by reversing the steps of removal.
PWS-110RX1A
"5-4. Top Panel
"5-17. iAP-005 Board
"5-18.
CPU".)
Notch
Memory socket
(1)
Levers
Memory module
Assembly".)
Assembly".)
Memory socket
Notch
Memory module
(2)
5-32