5-9.
Power Unit
Note
Before removing or installing the power unit, be sure to unplug the power cord from the AC inlet.
Removal
1.
Remove the four screws, and then remove the rear panel (power) assembly.
Rear of this unit
B3 x 8
2.
Pull up the lever in the direction of the arrow to unlock the power unit, and then pull the handle to draw out the
power unit.
Rear of this unit
Power unit
Installation
3.
Pull up the lever in the direction of the arrow, and then insert the power unit.
PWS-110RX1A
Rear panel (power)
assembly
Power unit
Handle
Lever
5-12