Fan Assembly - Sony PWS-110RX1A Service Manual

5-12.

Fan Assembly

Preparation
1. Remove the top panel assembly. (Refer to
Procedure
1. Remove the fan duct (110).
2. Disconnect the harness from the connector (CN705) on the MB-1204 board and remove the fan assembly (FAN1).
3. Remove other fan assemblies (FAN2 to FAN5) in the same way as in step 2.
FAN5 FAN4
CN701 CN702
4. Install the removed parts by reversing the steps of removal.
PWS-110RX1A
"5-4. Top Panel
Fan assemblies
FAN3 FAN2
CN703
CN705
CN704
Assembly".)
Fan duct (110)
FAN1
Fan assembly
(FAN1)
Harness
CN705
MB-1204 board
5-19