Recovery Methods; Recovery By The Standard Feature Of Windows - Sony PWS-110RX1A Service Manual

1-6.

Recovery Methods

This section describes how to recovery the system of this unit.
There are three recovery methods depending on the symptoms of the unit.
Executing recovery initializes the software and may make its version older than the version before recovery. After
recovery has been completed, update the software according to
1-6-1.

Recovery by the Standard Feature of Windows

When Windows starts normally but the application program does not run stably, carry out the following procedure for
recovery.
Procedure
1. Remove the top panel assembly. (Refer to
2. Set Bit1 of the DIP switch (S2201) on the MB-1204 board to ON. (Refer to
Switch Settings".)
3. Install the top panel assembly.
4. Turn on the unit to start Windows.
5. Type "Settings" in the search box at the lower left of the window, and then click the Settings icon.
PWS-110RX1A
"1-4. Software
"5-4. Top Panel Assembly".)
Update".
"MB-1204 Board" in "1-2-1. Onboard
1-21