1-9.
Coaxial Cable
1-9-1.
Disconnecting/Connecting Fine-Wire Coaxial Cable
Note
• Be very careful when handling the fine-wire coaxial cable so that fine wires are not disconnected.
• When disconnecting the fine-wire coaxial cable, be sure to hold the connector. Do not attempt to pull the cable.
• Check that the contact surface of the fine-wire coaxial cable connector is free from dirt or dust.
Type D
Fine-wire coaxial cable
Disconnecting
1.
Hold the connector between your finger tips and disconnect the fine-wire coaxial cable vertically.
Connecting
1.
Hold the connector between your finger tips and connect the fine-wire coaxial cable vertically.
PWS-110RX1A
OK
Hold the connector to disconnect.
NG
Do not attempt to disconnect by
pulling the cable.
1-30