6.
User Account Control screen is displayed.
Click [Yes] to start the installation.
When Windows Security dialog is displayed, click [Install].
Tip
A command prompt opens and closes during the installation. Wait until the installation finishes.
7.
After the installation is complete, make sure that there is no error, and then click "Finish".
When reboot dialog is displayed, click [No].
Software Version Check after Update
Procedure
1.
Turn off the unit, and remove the power cord
2.
Wait for at least 10 seconds, connect the power cord, and then turn on the unit.
3.
On the Control Panel window, select "Programs and Features" from "Programs" in "Control Panel".
PWS-110RX1A
1-17