Setting The Activation Interval For Sleep Mode (Power-Saving Feature) - Roland TrueVIS MG-640 User Manual

Setting the Activation Interval for Sleep Mode (Power-saving Feature)

This setting is used to set how long it should take until the machine goes into sleep mode (the state in
which the power-saving feature is working) when no print data is received and no operations are per-
formed for a continued length of time.
Procedure
1.
Press [MENU].
2.
Press [▼] several times to display the following screen.
MENU
SUB MENU
3.
Press [▶].
4.
Press [▼] several times to display the following screen.
SUB MENU
SLEEP
5.
Press [▶] twice to display the screen shown below.
INTERVAL
15min
6.
Press [▲] or [▼] to set the time.
7.
Press [ENTER] to confirm your entry.
8.
Press [MENU] to return to the original screen.
MEMO
• Default setting: 30 Minutes
• When "SLEEP SETTING" is set to "DISABLE", the machine does not switch to sleep mode, so this setting is
ignored.
RELATED LINKS
・
P. 214Deactivating the Sleep Mode (Power-saving Feature)
15min
Managing the Operations Appropriately and Efficiently
Optimizing Operation Management
213