Table of Contents
Advertisement
Accurately Adjusting the Cutting Settings
Fine-tuning the Cutting Conditions
You can accurately set items such as the blade force, movement speed, and blade offset to match the na-
ture of the media and the shape to cut. First, perform a cutting test, and then determine and enter the
setting values. After entering the setting values, perform a cutting test again and check the results. Re-
peat the process of performing a cutting test and making the settings several times to find the optimal
setting values.
Procedure
1.
Close the front cover.
2.
Press [◀], [▶], [▲], or [▼] to move the cutting carriage to the location where you want to carry out the
cutting test.
You can freely set the location for the cutting test.
3.
Press [FUNCTION].
4.
Press [▼] several times to display the following screen.
FUNCTION
CUT CONFIG
5.
Press [▶] to display the following screen.
CUT CONFIG
TEST CUT
6.
Press [ENTER].
The test pattern is cut.
7.
When the cutting of the test pattern is finished, press [▼].
8.
Check the results of the cutting test.
Check item
Check the shape.
Peel off the circle.
Result
The cut shape is distorted.
The square also peels off.
Some uncut areas remain.
Setting item
Adjustment
"SPEED"
Reduce
"FORCE"
Increase
"SPEED"
Reduce
Optimizing the Output Quality
155
Advertisement
Table of Contents
