Step 2: Circulating The Ink (Only When Using White Ink) - Roland TrueVIS MG-640 User Manual

Step 2: Circulating the Ink (Only When Using White Ink)

* This work is not necessary when using four colors (CMYK). Go to Step 3.
Procedure
1.
Press [MENU].
2.
Press [▼] several times to display the following screen.
MENU
SUB MENU
3.
Press [▶] once, and then press [▼] several times to display the screen shown below.
SUB MENU
INK CONTROL
4.
Press [▶] once, and then press [▼] several times to display the screen shown below.
INK CONTORL
CIRCULATE INK
5.
Press [ENTER].
The screen shown below appears, and then the ink circulation starts. The (approximate) remaining
time for the procedure is displayed on the screen. (The display shown below is an example. "01:45"
= "1 minute and 45 seconds")
CIRCULATING INK
>>
Depending on the timing with which the ink circulation is started, the following screen may be dis-
played and cleaning may start. When cleaning is complete, the ink circulation will start, so wait
for the ink circulation to complete. (The display shown below is an example. "01:45" = "1 minute
and 45 seconds")
CLEANING...
>>
When finished, the screen shown below appears again.
INK CONTORL
CIRCULATE INK
01:45
01:45
Preparing to Move the Machine
Operations When Moving the Unit
343