Starting the DR Detector
To start the DR Detector:
1. Fully charge the battery.
Charge the battery on the day of examination or on the previous day.
2. Attach the battery.
Align the claw on the battery pack and the groove on the battery bay (1).
Insert the battery pack fully (2). Push down the battery pack (3). Slide the
lock lever toward (lock) side (4) and lock it.
1
Figure 6: Attach the battery
3. Turn on the detector.
Caution: Be sure to use only the dedicated battery pack for the
DR Detector.
Note: The battery slowly discharges even if not in use. The
battery pack may have expired if it discharges immediately
after being fully charged. You can purchase an optional battery
pack to replace an exhausted one.
Note: Make sure that the lock lever is placed to the (unlock)
side.
1
2
Note: Make sure that the battery is securely attached.
DX-D 40C, DX-D 40G | Getting started | 57
3
4
4
0290A EN 20140626 1622