34 | DX-D 40C, DX-D 40G | Introduction to the DR Detector
Cleaning
To clean the exterior of the equipment:
1. Stop the system
2. Wipe the exterior of the system with a cloth slightly moistened with a
neutral detergent.
3. Start up the system.
0290A EN 20140626 1622
Warning: When the equipment is going to be cleaned, be
sure to turn OFF the power of each device, and to unplug
the power cord from the AC outlet. Never use anhydrous
or high solvency alcohols, benzine, thinner or any other
flammable cleaning agent. Otherwise, it may result in
fire or electric shock.
Caution: Make sure no liquid gets in the device.
Caution: Clean the equipment with only a little moisture. Do
not spray disinfectants or detergents directly on the
equipment. Do not pour liquid directly on the equipment.
Caution:
Do not use abrasvie brush and scraper to clean the product.
Note: Do not open the equipment for cleaning. No
components inside the device require cleaning by the user.