Ignition Switch; Keyless Enter 'N Go™ Ignition - Jeep GRAND CHEROKEE 2023 Owner's Manual

24 GETTING TO KNOW YOUR VEHICLE

IGNITION SWITCH

K E ' G ™ I
EYLESS NTER N O
This feature allows the driver to operate the ignition switch
with the push of a button as long as the key fob is in the
passenger compartment.
The START/STOP ignition button has several operating
modes that are labeled and will illuminate when in
position. These modes are OFF, ON/RUN, and START.
START/STOP Ignition Button
1 — OFF
2 — ON/RUN
The push button ignition can be placed in the following
modes:
OFF
GNITION
 The engine is stopped
 Some electrical devices (e.g. power locks, alarm, etc.)
are still available
ON/RUN
 Driving position
 All electrical devices are available (e.g. climate
controls, heated seats, etc.)
START
 The engine will start (when foot is on the brake pedal)
NOTE:
 If the ignition position does not change with a push of
the ignition button, and the instrument cluster displays
a message such as "Key Fob Not Detected", the key fob
may have a low or depleted battery. In this situation, a
backup method can be used to operate the ignition
switch. Put the nose side of the key fob (side opposite
of the emergency key) against the START/STOP ignition
button and push to operate the ignition switch.
 Replacement of the key fob battery is recommended.
Depleted Key Fob Battery Procedure
WARNING!
 When exiting the vehicle, always place the ignition in
the OFF position, remove the key fob from the
vehicle, and lock your vehicle.
 Never leave children alone in a vehicle, or with
access to an unlocked vehicle.
 Allowing children to be in a vehicle unattended is
dangerous for a number of reasons. A child or others
could be seriously or fatally injured. Children should
be warned not to touch the parking brake, brake
pedal or the gear selector.
(Continued)