Air Suspension Modes; Instrument Cluster Display Messages; Operation - Jeep GRAND CHEROKEE 2023 Owner's Manual

126 STARTING AND OPERATING
If equipped with a touchscreen radio, all enabling/
disabling of air suspension features must be done through
the radio page 168.
Ú
WARNING!
The air suspension system uses a high pressure
volume of air to operate the system. To avoid personal
injury or damage to the system, see an authorized
dealer for service.
A S M
IR USPENSION ODES
The Air Suspension system has multiple modes to protect
the system in unique situations:
Tire/Jack Mode
To assist with changing a spare tire, the air suspension
system has a feature which allows the automatic leveling
to be disabled page 168.
Ú
NOTE:
This mode is intended to be enabled with the ignition on.
Auto Entry/Exit Mode
To assist in entering and exiting the vehicle, the air
suspension system has a feature which automatically
lowers the vehicle to Entry/Exit ride height
When towing, the automatic Entry/Exit mode may be
disabled through Uconnect to prevent vehicle and trailer
movement when the gear selector is moved to PARK.
NOTE:
This mode is intended to be enabled with the ignition on.
Transport Mode
To assist with flatbed towing, the air suspension system
has a feature which will put the vehicle into Entry/Exit
height and disable the automatic load leveling system
page 168.
Ú
NOTE:
This mode is intended to be enabled with ignition on.
Suspension Display Messages Mode
The "Suspension Display Messages" setting allows you to
only display suspension warnings page 168.
Ú
NOTE:
This mode is intended to be enabled with the ignition on.
Wheel Alignment Mode
Before performing a wheel alignment this mode must be
enabled page 168.
Ú
page 168.
Ú
NOTE:
This mode is intended to be enabled with the ignition on.
If equipped with a touchscreen radio, all enabling/
disabling of air suspension features must be done through
the radio page 168.
Ú
I
NSTRUMENT
M
ESSAGES
When the appropriate conditions exist, a message will
appear in the instrument cluster
O
PERATION
The indicator lamps 1 through 5 will illuminate to show the
current position of the vehicle. Flashing indicator lamps
will show a position which the system is working to
achieve. When raising, if multiple indicator lamps are
flashing while raising, the highest flashing indicator lamp
is the position the system is working to achieve. When
lowering, if multiple indicators are flashing while lowering,
the lowest solid indicator lamp is the position the system
is working to achieve.
C D
LUSTER ISPLAY
page 84.
Ú