Outside Mirrors With Turn; Signal - If Equipped; Power Mirrors - Jeep GRAND CHEROKEE 2023 Owner's Manual

O M W T
UTSIDE IRRORS ITH
S — I E
IGNAL F QUIPPED
Driver and passenger outside mirrors with turn signal
lighting contain LEDs, which are located in the upper outer
corner of each mirror.
The LEDs are turn signal indicators, which flash with the
corresponding turn signal lights in the front and rear of the
vehicle. Turning on the Hazard Warning flashers will also
activate these LEDs.
P M
OWER IRRORS
The power mirror control switch is located on the driver's
side door trim panel.
To adjust a mirror, rotate the control switch to the mirror
you want to adjust (L) or (R). Then push the switch in the
direction that you want the mirror to move.
URN
1 — Neutral Position
2 — Left Mirror
3 — Control Switch
4 — Right Mirror
5 — Power Folding Position
NOTE:
Once adjustment is complete, rotate the knob to the
neutral position to prevent accidental movements.
Power Mirror Switch
GETTING TO KNOW YOUR VEHICLE
Power Folding — If Equipped
To fold the door mirrors in using the Power Folding Mirror
function, rotate the control switch to the power folding
position. Rotating the control to the left, right, or neutral
position will return the mirrors to the driving position.
If the power mirror control switch is moved again during
door mirror folding (from closed to open position and vice
versa), the movement direction is reversed.
Resetting The Power Folding Outside Mirrors
You may need to reset the power folding mirrors if the
following occurs:
 The mirrors are accidentally blocked while folding.
 The mirrors are accidentally manually folded/unfolded
(by hand or by pushing the power folding mirror switch).
 The mirrors come out of the unfolded position.
 The mirrors shake and vibrate at normal driving
speeds.
To reset the power folding mirrors: Fold and unfold them
by turning the switch (this may require multiple switch
activations to synchronize the driver and passenger
mirror). This resets them to their normal position.
Power mirror position can be saved as part of the Driver
Memory Settings (if equipped) page 34.
Ú
47