Height And Direction Of Presser Foot - Husqvarna VIKING Designer Jade Service Manual

8. HEIGHT AND DIRECTION OF PRESSER FOOT

Check
1. The height of the presser foot from the needle
plate should be 6.5 mm when it is lifted up.
2. The presser foot should be facing frontward (the
edge of foot is parallel with the feed dog slot on
needle plate).
If adjustment is needed, follow these procedures:
Adjustment
1. Remove the front enclosure.
2. See the machine from diagonally forward right,
loosen the screw (a) is in the front.
3. Adjust the height and direction of presser foot.
4. Retighten the screw (a).
Settings
1
2
2 4
Presser Bar
Presser Bar
Guide Bracket
6.5 mm
a
9