Service Menu 4 - Test Patterns - Husqvarna VIKING Designer Jade Service Manual

Service Menu 4
- Test Pattern
Entering service menu 4.
1. Press button " ".
2. The display shows the service menu 4 according
to below picture.
The functions in this menu are reached by pressing
the Stitch selection buttons 0-9.
Key No 0
1
2
3
4
1. Total on time = Indicates how many hours and
minutes the machine has been switched on.
2. Total on sew = Indicates how many hours and
minutes the machine has been sewed on.
3. Total embr. time = Indicates how many hours and
minutes the machine has been embroidered on.
4. Main SW = Main Software version, bbbb= build
version,yyyymmdd= year month day.
26
Service Program
Key No 1
Test pattern # 1 : Mending
This pattern tis used for minute adjustment of
Mending pattern.
Before you use this pattern, you need to adjust
machine balance according to P16 "ADJUSTING
THE FORWARD REVERSE STITCH".
Check
1. Select Mending stitch by pressing the button 1.
2. Difference of both ends of right and left should be
0~3mm. If they are not so, adjust as follows.
Adjustment
1. By pressing the - and + button of the Stitch length
button, change the value:-5.6~5.6. Default value
is "0".
• I f the reverse stitch is finer than the forward stitch,
select - values.
• If the reverse stitch is coarser than the forward
stitch, select + value.
0~3mm