Embroidery Unit Removing The Exterior Parts; Y Carriage Cover A; Y Carriage Cover B - Husqvarna VIKING Designer Jade Service Manual

EMBROIDERY UNIT
REMOVING THE EXTERIOR PARTS
A. Y carriage cover A
1. Loosen the screw (a) located on the back side of
the embroidery unit.
2. Push the Y carriage cover A toward the direction
of the arrow and pull up the front part of it.
3. Come off the hook (b) and remove the Y carriage
cover A.
B. Y carriage cover B
1. Hold the Y carriage cover B not to fall and loosen
the screw (c) located on the bottom side of the
embroidery unit.
2. Remove the Y carriage cover B.
Embroidery Unit
1
2
3
1
2
A
a
A
A
b
B
c
B
43