Replacing The Exterior Parts; Rear Enclosure; Top Cover; Unit Cover - Husqvarna VIKING Designer Jade Service Manual

REPLACE THE EXTERIOR PARTS
H. Rear Enclosure
1. Lower the presser foot lifter.
2. Replace the rear enclosure.
3. Replace the screw (c), repace the cap.
4. Connect the connector to remove the hook (a,b)
will fit into place.
G. Top Cover
1. Replace left side hings (a).
2. Replace right side hings (b), replace the top
cover.
F. Unit Cover
1. Put the unit cover to fit into place behind the
thread take-up lever cover as shown.
38
Covers
3
4
a
1 2
a
1
c
b
G
a b
b
F