Front Enclosure - Husqvarna VIKING Designer Jade Service Manual

E. Front Enclosure
1. Remove the screw (a) located on the top right
side of machine.
2. Loosen the screw (b) located on the top left side
of machine.
3. Loosen the screw (c) located left side of the
machine arm.
4. Remove the screw (d).
5. Pull the hand wheel (e) to the left side to remove
it.
6. Tilt the machine backward. Insert a flathead
screwdriver into the bedside of the front
enclosure. Pull upward to come off the hooks (f).
34
Covers
1
2
3
4 5
e
6
Rear Enclosure
Rear Enclosure
a
b
c
f
E
d