Table of Contents
Advertisement
2. Replace the unit cover so that 3 hooks will fit into
place.
3. Replace the screws (a,b).
4. Replace the screws (e, d), replace each cap.
E. Front Enclosure
1. Connect the cable to the connector (n) as follows.
Pull up the both black parts located on the
connector (n) lightly. Insert the cable so that the
blue line of cable will face to the left. Push the
black parts evenly to lock the cable.
2. Put the front enclosure to fit into place behind the
thread take-up lever cover as shown.
3. Replace the front enclosure so that each hooks
will fit into place.
Covers
2
3
f
b
4
1
2
3
g
h
F
a
e
d
n
39
Advertisement
Table of Contents
