Installing Dimm - NEC BladeServer Express5800 Series User Manual

CPU unit:
When the number/letter of the last character is an even number or A, C, or E:
The MAC address for LAN port 3 is as described on the label.
The MAC address for LAN port 4 can be obtained by adding 1 to the MAC address.
When the number/letter of the last character is an odd number or B, D, or F:
The MAC address for LAN port 3 can be obtained by adding 1 to the MAC address.
The MAC address for LAN port 4 can be obtained by adding 2 to the MAC address.
The MAC addresses can be checked by using a Windows or Linux command.
Windows
Enter "ipconfig /all" in the MS-DOS prompt or from [Run] in the Start menu to see the
indicated physical address part.
Linux
Enter "ifconfig" in the prompt to see the indicated "Hwaddr."

Installing DIMM

If your CPU blade is not equipped with memory, install DIMM's according to Chapter 9.
Two DIMM's must be populated in a pair.
Setting Up Your Server 3-3