NEC BladeServer Express5800 Series User Manual page 208

There are some cases where the following event log is registered when you use Windows
Server 2003 R2:
Source:
Type:
Event ID:
Description: The IPMI device driver attempted to determine if the system supported an
→ If you use "Hardware Management" provided by Windows Server 2003 R2, the
event log above will be registered.
For more details, refer to "Enabling Microsoft Windows Server 2003 R2
Hardware Management" on the following site:
[NEC Express5800 Web Site]
http://www.nec.co.jp/express/download/W2K3_R2
Cannot install the operating system correctly:
Did you read the notes on installing the operating system?
→ See Chapter 5.
The system displays the message below and fails to log in:
→ In Windows Server 2003, the following message will be displayed if you fail to
activate the operating system within the specified time period.
Select "Yes" to activate the operating system.
Windows Product Activation
This copy of Windows must be activated with Microsoft before you can
continue, You cannot log on until you activate Windows.
Do you want to activate Windows now?
To shut down the computer, click Cancel.
IPMIDRV
Error
1001
IPMI BMC device. The driver attempted to detect the presence of the IPMI
BMC by searching the SMBIOS for Type 38 record. But either no record was
found or the record was not compatible with the version of the device driver.
If a SMBIOS Type 38 record was detected, the Dump Data field of the event
contains a binary representation of the record.
YES NO Cancel
Troubleshooting 8-15