NEC BladeServer Express5800 Series User Manual page 289

[Procedure for Modifying the Drive Letter]
Modify the drive letter of the system or boot volume in the following procedure:
1.
Click [Start], right-click [My Computer], and select [Manage] to start [Computer
Management].
2.
Select [Disk Management] in the left side of the window.
3.
Right-click a volume and select [Change Drive Letter and Path...].
4.
Click [Yes].
5.
Select [Assign a drive letter] and specify the drive letter you want to assign.
6.
Click [OK].
7.
If the following message appears, click [Yes]:
Changing the drive letter of a volume may cause programs to no
longer run. Are you sure you want to change this drive letter?
8.
Close [Computer Management].
Installing the Operating System B-31