8-40 System Upgrade
Installing DIMM
Follow the procedure below to install the DIMM. Make sure to power off the server before
starting installation except when replacing DIMM.
Shutdown OS.
1.
The system turns off automatically and the POWER LED goes off.
Disconnect power cord from outlet.
2.
Remove the CPU module.
3.
Check to be sure in which socket you are mounting the DIMM.
4.
Remove the connector cover from the socket.
5.
A DIMM connector cover is installed to the open socket. When the levers on both ends
of the connector are opened, the DIMM connector cover is unlocked and you can remove
the cover.
IMPORTANT: Carefully keep the removed DIMM connector cover.