Optional Network Board Driver - NEC BladeServer Express5800 Series User Manual

5-20 Installing the Operating System with Express Setup
NOTE: It is recommend to add [Network Monitor] in [Adding
Services]. [Network Monitor] can monitor the frame (or packet) that
the computer sends or receives. This tool is valuable when analyzing
network issues. For information on how to install the tool, see "Setting
for Solving Problems" described later in this chapter.

Optional Network Board Driver

If you want to use the optional Network Board (N8403-017/020), install the driver stored on the
NEC EXPRESSBUILDER DVD.
The driver is in the following directory:
"\001\win\winnt\dotnet\ns41s\pro1000\ws03xp2k"
Refer to the installation procedure described in the section "Installation of the Optional Network
Board Driver."
Installation of the Optional Network Board Driver
1.
Open [Device Manager].
2.
Click [Network adapters] and double-click [(Network Adapter Name)].
[(Network Adapter Name) Properties] appears.
NOTE: [(Intel(R) PRO/1000...)] is the name of the onboard adapter.
All other names are for the Optional Network Board.
3.
Click the [Driver] tab and click [Update Driver...]. The [Hardware Update Wizard]
appears.
4.
Select the [Install from a list or specific location (Advanced)] radio button and click
[Next].
5.
Select the [Search for the best driver in these locations] radio button and check the
[Search removable media (floppy, CD-ROM...)] check box.
6.
Check the [Include this location in the search] check box and specify:
"\001\win\winnt\dotnet\ns41s\pro1000\ws03xp2k"
Then, click [Next].
7.
Click [Finish].