Enabling Safety Mode - Nextar ME Software Instruction Manual

•
Tap
to give you a quick overview of the route.
•
Tap
speed and with voice guidance instructions announced.
This option is for demonstration purposes, or for
checking difficult parts of the route in advance.
3. The simulation can be aborted any time by tapping

3.7 Enabling Safety Mode

This feature is available in Advanced mode only.
Safety Mode disables the touch screen above 10 km/h (6 mph) to
keep your attention on the road. While driving, you will not be able to
set a new destination or to change settings. The only screen control
that remains enabled is the gesture that puts you back on the Map
screen.
The procedure is explained starting from the Map screen.
Tap the following buttons:
.
to run the simulation at high speed
to run the simulation at normal
,
60
.
, ,