Route Planning Options - Nextar ME Software Instruction Manual

Button
Dynamic Volume

4.5.3 Route Planning options

These settings determine how routes will be calculated. Tap the
following buttons:
Button
Vehicle
Road Types Used
for Route Planning
When driving at high speed, the noise in the car
may be too loud to clearly hear the voice
guidance and other sounds. Using Dynamic
Volume you can instruct Nextar Navigation
System to increase the volume when your
speed exceeds a certain minimum, and reach its
highest volume at the given maximum speed.
, ,
You can set the type of vehicle you will use to
navigate the route. Based upon this setting,
some of the road types will be excluded from the
route (e.g. highways for pedestrians), or some of
the restrictions may not be taken into account
(e.g. emergency vehicles have only a few
restrictions).
To let the route fit your needs, you can also set
which road types are to be considered for or to
be excluded from the route if possible.
Excluding a road type is a preference. It does
not necessarily mean total prohibition. If your
destination can only be accessed using some of
the excluded road types, they will be used but
only as much as necessary. In this case a
warning icon will be shown on the Route
Information screen, and the part of the route not
matching your preference will be displayed in a
107
Description
.
Description