Nextar ME Software Instruction Manual page 79

Symbo
l
Via point
Destination
point)
Route color
Active leg of the route The section of the route on which you
Inactive legs of the
route
Streets and roads that
are excluded from the
navigation
Name
(end
Description
A via point is an intermediate
destination. You can place as many
via points as you want.
The last point of the route, the final
destination.
The route always stands out with its
color on the map, both in daytime and
in night color mode. The active leg of
the route is always displayed in a
brighter shade than the inactive
(upcoming) legs.
are driving.
If you have not added any via points
(only a destination), the entire route is
the active leg. If you have added via
points, the active leg is the part of the
route from your current location to the
next route point (the next via point, or
the destination if there are no more
via points to reach).
The future sections of the route; each
of them becomes active when you
reach the via point at its beginning.
You can choose whether you want to
use or avoid certain road types (page
107). However, when Nextar
Navigation System cannot avoid such
roads, the route will include them and
it will show them in a color that is
different from the route color.
78