Using The Cursor (The Selected Map Location) - Nextar ME Software Instruction Manual

2.3.4 Using the Cursor (the selected map location)

First, place the Cursor at the desired map location with one of the
following options:
•
Use the Find menu to select a location. The map returns with
the selected point (the Cursor) in the middle, and the Cursor
menu appears with the available options.
•
Tap the screen and tap again to place the Cursor at the desired
location. Now tap
You can perform the following actions:
Button
to open the Cursor menu.
In the active route, uses the Cursor as the start
point by replacing the current GPS position
(available in Advanced mode only)
In the active route, uses the Cursor as the
destination by replacing the previous destination
In the active route, uses the Cursor as a via
point (an intermediate destination) preceding
the destination (available in Advanced mode
only)
In the active route, uses the Cursor as the
destination while keeping the previous
destination as a via point (available in Advanced
mode only)
Shows the different routes calculated by the
available routing methods. Choose the one that
suits your needs the best.(available in
Advanced mode only)
Saves the Cursor as a POI(available in
Advanced mode only)
Saves the Cursor as a Favorite location
26
Action