Nextar ME Software Instruction Manual page 115

Button
Warn if Too Fast
for a Pedestrian
Safety Mode
System is able to warn you if you exceed the current
limit. This information may not be available for your
region (ask your local dealer), or may not be fully
correct for all roads in the map. This setting lets you
decide whether you wish to receive the warnings.
You can set the relative speeding level at which the
application warns you (100% represents the current
speed limit):
•
In Built-up Areas: in cities and towns
•
Elsewhere: at all other locations
There are two types of warnings. You can turn them
on or off independently:
•
Audible Warning: A voice message is played
using the selected voice guidance profile.
•
Visible Warning: A symbol with the speed
limit appears in the corner of the map (for
example:
Enable this warning to be alerted if pedestrian mode
is activated and you drive fast. You are asked if you
want to change to car navigation mode. This way
you can be sure you will not be routed via one-way
roads in the wrong direction as a pedestrian could,
for example.
Safety Mode disables the touch screen above 10
km/h (6 mph) to keep your attention on the road.
While driving, you will not be able to set a new
destination or to change settings. The only screen
control that remains enabled is the gesture that puts
you back on the Map screen.
Description
).
114