Entering An Address Without Knowing The District/Suburb - Nextar ME Software Instruction Manual

4. Select the street from the list.
5. Enter the house number:
1. Tap
2. Enter the house number on the keyboard.
3. Tap
6. A list appears with the matching addresses. Tap the desired
one.
7. The map appears with the selected point in the middle. Tap
(Advanced mode) from the Cursor menu. The route is then
automatically calculated, and you can start navigating.

3.1.2.3 Entering an address without knowing the district/suburb

Long roads can run across several districts or suburbs. You may not
know what particular house number is located where. In this case,
follow the instructions below:
The procedure is explained starting from the Navigation menu.
1. Tap the following buttons:
,
2. By default, Nextar Navigation System proposes the
country/state and city where you are. If needed, tap the button
•
Tap
before it appears automatically.
(Simple mode) or
(Advanced mode).
to open the list of results
.
to finish entering the address.
43
(Simple mode), or