1. Manuals
  2. Brands
  3. Nextar Manuals
  4. GPS
  5. X3I-02 - Automotive GPS Receiver
  6. Important safety instructions manual

Nextar X3I-02 - Automotive GPS Receiver Important Safety Instructions Manual

X3i-02 hardware
Hide thumbs Also See for X3I-02 - Automotive GPS Receiver:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Manual
，
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USE-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of sufficient magnitude to
constitute a risk of electric to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OF MOISTURE.
POWER SUPPLY:
Connect the supplied adaptor to the side of the unit in the slot marked "DC 5V IN". Plug
the two-prong end of the power cord to an AC100-240V outlet. If you have difficulty
inserting the plug, turn it over and reinsert it. If the unit will not the used for a long time,
disconnect the plug from the outlet.
NOTE:
Before plugging the power cord into an AC outlet, make sure that all the connections
have been made.
CAUTION: These servicing instructions are for use by qualified service personnel only.
To reduce the risk of electric shock, do not perform any servicing other than that
contained in the operating instructions unless you are qualified to do so.
Refer to service manual for servicing instructions. To reduce the risk of fire or electric
shock, do not expose this apparatus to rain or moisture.
Important Safety
Instructions
1

Advertisement

Table of Contents
loading

Related Manuals for Nextar X3I-02 - Automotive GPS Receiver

Summary of Contents for Nextar X3I-02 - Automotive GPS Receiver

  • Page 1: Important Safety Instructions

    Important Safety Instructions ， CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USE-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric to persons.
  • Page 2 Important Safety Instructions NOTES Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a damp cloth. Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions.
  • Page 3 Important Safety Instructions Warning Failure to avoid the following potentially hazardous situations may result in injury or property damage. The unit is designed to provide you with route suggestions. It does not reflect road closures or road conditions, traffic congestion, weather conditions, or other factors that may affect safety or timing while driving.
  • Page 4 Important Safety Instructions Note: This equipment has been tested and found to comply with limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the...

  • Page 5: Accessories

    Accessories Accessories List ITEM NAME Instruction Manual Interchangeable Face Plates 2 in different colors AC Adaptor Car Adaptor Mounting Bracket USB Cable Mounting Cradle Stylus Dashboard Mount Disk SD Card Pouch NOTE Accessories and their parts numbers are subject to modification without prior notice due to improvements.

  • Page 6: Table Of Contents

    Contents …………………………………..………..1 Important Safety Instructions ……………………………….…………...5 Accessories ……………………………….…………...7 View of Main Unit ……………………………….……….…..9 System Connections …………………………….……….….….11 Power Supply Preparation ……………………………….…………..13 General Setup …………………………….……………..17 Playing Music ……………………………….…………..19 Photo Viewer ……………………………….…………..21 Use of the Mount Accessories ……………………………….…………..22 Troubleshooting ……………………………….…………..24 Specifications...

  • Page 7: View Of Main Unit

    View of Main Unit Front and bottom panel POWER Button Press for a longer time to enter or exit the standby mode. Card Slot Insert the SD card into the slot. Earphone Jack Used to connect earphones for private listening. When the earphones are connected to this jack, the speaker will be turned off automatically.
  • Page 8 View of Main Unit Rear Panel RESET Button Press to reset the system. Stylus Changing the face plate in different colors You can change the face plate of the GPS unit by yourself in three different colors supplied: champagne, black and pink. See the figure below for details: Lift up the face plate in the arrow direction to remove it.

  • Page 9: System Connections

    -50 MB available hard drive space -Available serial port and/or USB Port -256-color display adaptor and monitor (16 bit color required) In the near future, map updates will be available for down load from our website. Please check www.nextar.com periodically for the information on downloads.
  • Page 10 System Connections Inserting SD Card The unit is designed with SD card slot which allows you to insert the SD card into the unit as shown below: Connecting to Earphones Connect the earphones to the right side of the unit for private listening. When earphone is connected, the speakers will automatically turn off.

  • Page 11: Power Supply Preparation

    Power Supply Preparation Using the AC Adaptor The unit is supplied with an AC adaptor for powering it and charging its battery. Connect AC adaptor to the right side of the unit in the jack marked DC 5V IN, as shown on the right. Plug the two-prong end of the power cord into a grounded electrical outlet.

  • Page 12: Charging The Battery Pack

    Power Supply Preparation Working conditions and precautions for the rechargeable battery Battery should only be used and charged when temperatures are between 32°-100°F. Maintain well-ventilated conditions around the product to avoid overheating. Don’t put the product on a bed, sofa or anything that may block ventilation to the product. When the battery is weak, an indication menu will appear on the LCD screen and after a little while, the unit will power OFF automatically.

  • Page 13: General Setup

    General Setup System Main Menu When in navigation mode, tap button in the Menu screen. A confirmation message appears asking if you want to exit the program now, as shown below. In the confirmation screen, tap and the system main menu appears. In the main menu, there are four items for selecting.
  • Page 14 General Setup Language in the settings menu to enter Language setting menu for language selecting, as shown below: Tap the buttons to select language. Then tap to confirm or tap to cancel. Backlight in the settings menu to enter Backlight setting menu for backlight adjusting, as shown below: Tap the buttons to adjust the backlight level.
  • Page 15 General Setup Date & Time in the settings menu to enter Date & Time setting menu for changing to the current time zone, as shown below: Tap the buttons to select the proper Time Zone. Tap the buttons of Date group to change the corresponding date and tap the buttons of Time group to change the corresponding time.
  • Page 16 General Setup Calibrate in the settings menu to calibrate, the screen will display as below: This item is used to calibrate the sensitivity of the touch screen. Tap the center of “+” as it moves around the screen. If you touch the center of “+” every time, it will disappear after having moved through a cycle (center→top left→bottom left→bottom right→top right).

  • Page 17: Playing Music

    Playing Music The unit is designed with SD card slot and supports MP3 and WMA format files playback. To use the music player, you will need to have an SD card with your MP3 music files preloaded. Please note you cannot use the navigation function of the device at the same time as using the music player.
  • Page 18 Playing Music In the menu, tap the MENU button to enter the music play list menu, as shown below: When you open the play list, the system will look for audio files on its SD memory card and create a play list automatically. If the play list consists of more than one screen, tap the up arrow for the previous page and the down arrow for the next page.

  • Page 19: Photo Viewer

    Photo Viewer The unit is designed with SD card slot and supports JPEG format files playback. To use the Photo Viewer, you will need to have an SD card with your JPEG picture files preloaded. Please note you cannot use the navigation function of the device at the same time as using the Photo Viewer.
  • Page 20 Photo Viewer In the folder menu, double tap the memory card icon to open it, the pictures stored in the memory card will be listed on the screen. If the pictures list consists of more than one screen, tap the up arrow for the previous page and the down arrow for the next page.

  • Page 21: Use Of The Mount Accessories

    Use of the Mount Accessories When using the unit in vehicle, you can use the supplied mount accessories (mount bracket, mount cradle and dashboard mount disk) to mount the unit in the vehicle. Take the following steps to operate: See Fig. 1. According to the arrow to slide the mount cradle to fix it to the mount bracket.

  • Page 22: Troubleshooting

    Troubleshooting Take these steps described in the tables below to solve simple problems before contacting customer service. If you suspect something wrong with this unit, immediately turn the power off and disconnect the power connector from the unit. Never try to repair the unit yourself because it is dangerous to do so.
  • Page 23 Troubleshooting POSSIBLE SOLUTION POSSIBLE CAUSE PROBLEM Use the adaptor to supply The built-in rechargeable power or charge the battery is weak. battery. Intermittent The unit may be obstructed Remove obstruction. reception and/or by something, such as heat unstable insulation paper. reception.

  • Page 24: Specifications

    Dynamic Range ≥80dB (1kHz) Power AC 100-240V ～ 50/60Hz; DC 5V Power Consumption < 8W Dimensions 100mmX76mmX25mm (L*W*D) Weight About 0.18kg DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE Nextar , a trademark of Nextar (Hong Kong) Limited. X3i0208EH01...

Table of Contents