Device Settings; Track Log Settings; You Can Change Some Device Settings To; You Can Set Up Automatic Track Log Saving - Nextar ME Software Instruction Manual

4.5.9 Device settings

You can change some device settings to control the screen backlight
when Nextar Navigation System is running. Tap the following buttons:
, ,
Button
Power Management You can set how the backlight will behave when
Backlight Intensity at
Daytime
Backlight Intensity at
Night

4.5.10 Track Log settings

You can set up automatic Track Log saving, and fine-tune related
settings. Tap the following buttons:
Button
Update Interval
.
the screen has not been touched for a while.
You have the following options:
•
Backlight Always On: The screen is
continuously lit.
•
Smart: When running on battery, Smart
Powersave will light up the screen only
when you tap the screen, or if there is
something to show you. After a few
seconds the light level decreases, and
after another few seconds the backlight
turns off. This helps achieve a longer
battery life.
You can set the backlight level for daytime use.
You can set the backlight level for night use.
This determines how often track points will be
116
Description
, ,
Description
.