Creating A Multi-Point Route (Appending A New Destination) - Nextar ME Software Instruction Manual

Button
The route is optimized. The start point and the
destination remain at their position, but the via points
are reordered to make the shortest possible route.
The selected point is removed from the route. The route
remains as it was before adding the new point.
Every time a new point is added, the route is recalculated
automatically, and you can start navigating right away.
3.3 Creating a multi-point route (appending a new
destination)
destination Multi-point routes are created from simple routes, so a
route must be active first. One of the ways of expanding the route is to
add a new destination. The previous destination becomes the last via
point of the route.
This feature is available in Advanced mode only.
1. Select a new location as you did in the previous sections. This
will be the additional destination in the route.
2. The map appears with the selected point in the middle, and the
Cursor menu opens automatically.
3. Tap
additional functions.
4. Tap
destination demoting the previous one to the last intermediate
destination.
5. [optional] To add more points to the route, repeat the above
steps as many times as you like.
Action
to open the full Cursor menu with the
to add the point as a new final
57