Trip Computer Screen - Nextar ME Software Instruction Manual

Name
Most of the fields on this screen have a
symbol shows whether the field it is attached to is shown on the map
as a Trip Data. It also shows the position of the data as follows:
Symbol

4.1.7.1 Trip Computer screen

The Trip Computer screen provides collected trip data. It can be
opened from the Trip Information screen by tapping
The fields on this screen are continuously updated while you keep the
screen open.
You can switch between the trips, pause then resume them, or reset
their data.
You have the following functions on this screen:
Description
This value is not shown on the map screen.
This value appears on the map screen in the Trip
Data area. This is the value at the top.
This value appears on the map screen in the Trip
Data area. This is the value in the middle.
This value appears on the map screen in the Trip
Data area. This is the value at the bottom.
symbol next to them. This
Description
88
Function
destination again.
.