Table of Contents
Advertisement
A number of utilities and tests are available for system diagnostic and control purposes.
This section covers the following topics:
"Ping" on page 9-92
"Trace Route" on page 9-94
"Telnet client" on page 9-95
"Disconnect Telnet console session" on page 9-96
"Factory defaults" on page 9-96
"Transferring configuration and firmware files with TFTP" on page 9-96
"Transferring configuration and firmware files with XMODEM" on page 9-99
"Restarting the system" on page 9-102
Note: These utilities and tests are accessible only through the console-based management screens. See
Chapter 5, "Console-Based Management,"
screens.
You access the Utilities & Diagnostics screens from the Main Menu.
for information on accessing the console-based management
Utilities & Diagnostics
Ping...
Trace Route...
Telnet...
Disconnect Telnet Console Session...
Trivial File Transfer Protocol (TFTP)...
X-Modem File Transfer...
Revert to Factory Defaults...
Restart System...
Utilities and Diagnostics 9-91
Advertisement
Table of Contents
