Table of Contents
Advertisement
To add a new user account, select Add User in the Security Options screen and press Return. The Add Name
With Write Access screen appears.
Enter Name:
Enter Password (11 characters max):
ADD NAME/PASSWORD NOW
Follow these steps to configure the new account:
1.
Select Enter Name and enter a descriptive name (for example, the user's first name).
2.
Select Enter Password and enter a password.
3.
To accept the new name/password combination, select ADD NAME/PASSWORD NOW. To exit the Add
Name With Write Access screen without saving the new account, select CANCEL. You are returned to the
Security Options screen.
To delete a user account, select Delete User to display a list of accounts. Select an account from the list and
press Return to delete it. To exit the list without deleting the selected account, press Escape.
Telnet is a TCP/IP service that allows remote terminals to access hosts on an IP network. The Netopia D-Series
supports Telnet access to its configuration screens.
Caution!
You should consider password-protecting or restricting Telnet access to the Netopia D-Series if you suspect
there is a chance of tampering.
To restrict Telnet access, select Security in the Advanced Configuration menu. The Security Options screen will
appear. There are two levels of Telnet restriction available:
To restrict Telnet access to the SNMP screens, select Enable Telnet Access to SNMP Screens and toggle it to
No. (See
"SNMP traps" on page
Add Name With Write Access
7-59.)
CANCEL
Security 8-63
Advertisement
Table of Contents
